Geodetic Support for LIA-20 Linear Induction Accelerator Assembly and Operation
https://doi.org/10.25205/2541-9447-2025-20-3-9-22
Abstract
The article presents methodological and technological solutions for geodetic support of the LIA-20 linear induction accelerator design and assembly. Based on the facility geometry and the accelerator elements positioning tolerances, the arrangement scheme was developed for reference geodetic network signs. To assess the accuracy of the geodetic signs mutual location and the laser tracker positioning in the accelerator hall, the results of mathematical modeling were studied. To coordinate the facility design with the structure of the accelerator, a survey was carried out, so the spatial model of the building was obtained. Here we show the procedures of elements’ axes determination and corresponding local coordinate systems construction for elements of accelerator. The solutions for fixing the coordinate system of the entire accelerator complex are given. The processes of equipment installation and setting into the design position are reported. The data showing the dynamics of the reference geodetic network signs relative displacement over 6 measurement cycles (2018 - 2024 period) are presented.
About the Authors
L. E. SerdakovRussian Federation
Leonid E. Serdakov, Ph.D., Senior Staff Scientist
Novosibirsk
A. V. Polyansky
Russian Federation
Andrey V. Polyansky, Ph.D., Senior Staff Scientist
Novosibirsk
P. A. Bak
Russian Federation
Petr A. Bak, Senior Staff Scientist
Novosibirsk
E. S. Vonda
Russian Federation
Elena S. Vonda, Engineer of Geodesy
Novosibirsk
V. S. Krapivin
Russian Federation
Vladimir S. Krapivin, Senior Engineer of Geodesy
Novosibirsk
K. I. Zhivankov
Russian Federation
Kirill I. Zhivankov, Scientist
Novosibirsk
P. A. Polozova
Russian Federation
Polina A. Polozova, Senior Lab Assistant
Novosibirsk
O. A. Nikitin
Russian Federation
Oleg A. Nikitin, Head of Department
Snezhinsk
A. R. Akhmetov
Russian Federation
Alexander R. Akhmetov, Head of Laboratory
Snezhinsk
I. V. Penzin
Russian Federation
Ilya V. Penzin, Research Engineer
Snezhinsk
References
1. Spatial Analyzer. User manual [Electronic resource]. URL: https://www.kinematics.com/ftp/SA/Install/Documentation/2023.2%20Documents/SA%20User%20Manual.pdf
2. Murzintsev P. P., Polyansky A. V., Serdakov L. E. On the optimization of reference geodetic ring networks of accelerators using laser trackers. Geodesy and Cartography, 2017, vol. 78, no. 5, pр. 2–6. (in Russ.)
3. Murzintsev P. P., Polyansky A. V., Burenkov D. B., Serdakov L. E. Geodetic support for the design, construction, operation and monitoring of accelerator-storage complexes. Monograph. Novosibirsk, 2021. (in Russ.)
4. Nikiforov D. A. Study of the dynamics of an electron beam in a powerful linear induction accelerator with focusing on lumped elements: dissertation of candidate of physical and mathematical sciences. Novosibirsk: BINP SB RAS, 2023. 94 p. (in Russ.)
5. Burenkov D. B. et al. Geodetic support for the NSLS-II booster creation. Geodesy and Cartography, 2013, no. 6, рp. 13–16. (in Russ.)
Review
For citations:
Serdakov L.E., Polyansky A.V., Bak P.A., Vonda E.S., Krapivin V.S., Zhivankov K.I., Polozova P.A., Nikitin O.A., Akhmetov A.R., Penzin I.V. Geodetic Support for LIA-20 Linear Induction Accelerator Assembly and Operation. SIBERIAN JOURNAL OF PHYSICS. 2025;20(3):9-22. (In Russ.) https://doi.org/10.25205/2541-9447-2025-20-3-9-22
JATS XML




















